{"id":105041,"date":"2025-06-02T05:09:01","date_gmt":"2025-06-02T05:09:01","guid":{"rendered":"http:\/\/tariqkhan"},"modified":"2025-06-02T05:09:01","modified_gmt":"2025-06-02T05:09:01","password":"","slug":"hardware-installation","status":"publish","type":"docs","link":"https:\/\/x-phy.com\/products\/endpoint-security\/support\/knowledgebase\/docs\/hardware-installation\/","title":{"rendered":"Hardware Installation"},"content":{"rendered":"

Laptop Installation:<\/h3>\n

 <\/p>\n

Gather Necessary Tools:<\/h4>\n

X-PHY SSD (ensure compatibility with your laptop)<\/p>\n

Small Phillips-head screwdriver (if required)<\/p>\n

\"\"<\/p>\n

 <\/p>\n

Prepare Your Laptop:<\/h4>\n

Power off your laptop completely.<\/p>\n

Disconnect any external power source and remove the battery (if applicable).<\/p>\n

Open the case of your laptop if necessary to access internal components.<\/p>\n

\"\"<\/p>\n

 <\/p>\n

Locate the M.2 Slot:<\/h4>\n

Consult your laptop’s manual or the manufacturer’s website to find the location of the M.2 slot.<\/p>\n

Typically, it’s located beneath a panel on the bottom of the laptop.<\/p>\n

\"\"<\/p>\n

 <\/p>\n

Ground Yourself:<\/h4>\n

Before proceeding further, ground yourself by touching an unpainted metal surface. This is an extra safeguard that protects your drive and components from static damage during the installation process.<\/p>\n

 <\/p>\n

Access the M.2 Slot:<\/h4>\n

Unscrew and remove the drive using the M.2 slot if applicable.<\/p>\n

Ensure you’re accessing the correct panel if your laptop has multiple compartments.<\/p>\n

\"\"<\/p>\n

 <\/p>\n

Insert the X-PHY SSD:<\/h4>\n

Align the notches on the SSD with the key in the M.2 slot.<\/p>\n

Gently insert the X-PHY SSD into the slot at a 30-45 degree angle.<\/p>\n

Press down firmly until the X-PHY SSD is seated properly.<\/p>\n

 <\/p>\n

Secure the X-PHY SSD:<\/h4>\n

If your laptop has a retaining screw, use it to secure the X-PHY SSD in place.<\/p>\n

Ensure the X-PHY SSD is firmly seated and doesn’t move around.<\/p>\n

\"\"<\/p>\n

 <\/p>\n

Replace the Panel:<\/h4>\n

Carefully replace the panel covering the M.2 slot.<\/p>\n

Tighten the retaining screw to secure the panel in place.<\/p>\n

 <\/p>\n

Reassemble Your Laptop:<\/h4>\n

Reinsert the battery (if removed) and reconnect any external power source.<\/p>\n

Power on your laptop and proceed to install an OS on the X-PHY SSD or proceed to install the X-PHY PC application if using as a secondary drive.<\/p>\n

 <\/p>\n

Desktop Installation:<\/h3>\n

 <\/p>\n

Gather Necessary Tools:<\/h4>\n

X-PHY SSD (ensure compatibility with your desktop)<\/p>\n

Small Phillips-head screwdriver (if required)<\/p>\n

\"\"<\/p>\n

 <\/p>\n

Prepare Your Desktop:<\/h4>\n

Power off your desktop completely.<\/p>\n

Disconnect the power cable and any connected cables.<\/p>\n

\"\"<\/p>\n

 <\/p>\n

 <\/p>\n

Locate the M.2 Slot:<\/h4>\n

Find the M.2 slot on your desktop motherboard.<\/p>\n

Refer to your motherboard manual or the manufacturer’s website for its location.<\/p>\n

\"\"<\/p>\n

 <\/p>\n

Prepare the Motherboard:<\/h4>\n

If there’s a standoff pre-installed for the M.2 slot, leave it as is.<\/p>\n

If not, install the standoff provided with your motherboard into the appropriate mounting hole.<\/p>\n

 <\/p>\n

Ground Yourself:<\/h4>\n

Ground yourself by touching an unpainted metal surface. This is an extra safeguard that protects your drive and components from static damage during the installation process.<\/p>\n

\"\"<\/p>\n

 <\/p>\n

Insert the X-PHY SSD:<\/h4>\n

Align the notches on the X-PHY SSD with the key in the M.2 slot.<\/p>\n

Gently insert the X-PHY SSD into the slot at a 30-45 degree angle.<\/p>\n

Press down firmly until the X-PHY SSD is seated properly.<\/p>\n

\"\"<\/p>\n

 <\/p>\n

Secure the X-PHY SSD:<\/h4>\n

If your motherboard has a retention mechanism, use it to secure the X-PHY SSD in place.<\/p>\n

If not, use a small screw to secure the X-PHY SSD to the standoff on the motherboard.<\/p>\n

\"\"<\/p>\n

 <\/p>\n

Reassemble Your Desktop:<\/h4>\n

Reconnect any cables that were disconnected earlier.<\/p>\n

Reconnect the power cable and any peripherals.<\/p>\n

Power on your desktop and access the BIOS\/UEFI to verify the X-PHY SSD is detected.<\/p>\n

 <\/p>\n

Initialize the X-PHY SSD:<\/h4>\n

Power on your Desktop and proceed to install an OS on the X-PHY SSD or proceed to install the X-PHY PC application if using as a secondary drive.<\/p>\n

 <\/p>\n

Final Steps:<\/h3>\n

Enjoy the enhanced security and performance provided by your new X-PHY SSD!
\nConsider configuring security features and other settings using the X-PHY PC application for added protection and customization.<\/p>\n

If you encounter any issues, refer to the X-PHY PC application guide or seek assistance from the X-PHY support team.<\/p>\n","protected":false},"excerpt":{"rendered":"

Laptop Installation:   Gather Necessary Tools: X-PHY SSD (ensure compatibility with your laptop) Small Phillips-head screwdriver (if required)   Prepare Your Laptop: Power off your laptop completely. Disconnect any external […]<\/p>\n","protected":false},"author":2,"featured_media":0,"comment_status":"closed","ping_status":"closed","template":"","meta":{"content-type":"","inline_featured_image":false,"footnotes":""},"doc_category":[74],"doc_tag":[],"class_list":["post-105041","docs","type-docs","status-publish","hentry","doc_category-x-phy-quick-start-guide"],"year_month":"2025-12","word_count":602,"total_views":0,"reactions":{"happy":0,"normal":0,"sad":0},"author_info":{"name":"X-PHY Editorial","author_nicename":"usama","author_url":"https:\/\/x-phy.com\/author\/usama\/"},"doc_category_info":[{"term_name":"X-PHY\u00ae Quick Start Guide","term_url":"https:\/\/x-phy.com\/products\/endpoint-security\/support\/knowledgebase\/x-phy-quick-start-guide\/"}],"doc_tag_info":[],"_links":{"self":[{"href":"https:\/\/x-phy.com\/wp-json\/wp\/v2\/docs\/105041","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/x-phy.com\/wp-json\/wp\/v2\/docs"}],"about":[{"href":"https:\/\/x-phy.com\/wp-json\/wp\/v2\/types\/docs"}],"author":[{"embeddable":true,"href":"https:\/\/x-phy.com\/wp-json\/wp\/v2\/users\/2"}],"replies":[{"embeddable":true,"href":"https:\/\/x-phy.com\/wp-json\/wp\/v2\/comments?post=105041"}],"version-history":[{"count":0,"href":"https:\/\/x-phy.com\/wp-json\/wp\/v2\/docs\/105041\/revisions"}],"wp:attachment":[{"href":"https:\/\/x-phy.com\/wp-json\/wp\/v2\/media?parent=105041"}],"wp:term":[{"taxonomy":"doc_category","embeddable":true,"href":"https:\/\/x-phy.com\/wp-json\/wp\/v2\/doc_category?post=105041"},{"taxonomy":"doc_tag","embeddable":true,"href":"https:\/\/x-phy.com\/wp-json\/wp\/v2\/doc_tag?post=105041"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}